China High Quality Flat Steel Sheet Manufacturers – Stamped Design Steel Door Skin For Metal Door SKin – Tofine

Product Description

The galvanized sheet has good bearing capacity, firmness and reliability, not easy to deform, and high cost performance. We choose good materials and ingenious craftsmanship, the product surface is smooth and the cut surface is flat without burrs, with high mechanical strength and stable performance.

Multi-specification, multi-material, large inventory has its own excellent equipment, and can be customized for different specifications and sizes according to customer requirements.

Galvanized sheet refers to a steel plate coated with a layer of zinc. Galvanizing is an economical and effective rust prevention method that is often used. About half of the world’s zinc production is used in this process. Galvanized steel plate is to prevent the surface of the steel plate from being corroded and prolong its service life, and the surface of the steel plate is coated with a layer of metal zinc.

According to the galvanizing process, it is divided into hot-dip galvanized sheet, cold galvanized sheet and electro-galvanized sheet.

Mainly used in construction, home appliances, automobiles, machinery, electronics, light industry and other industries, such as automobile manufacturing, refrigerators, construction, ventilation and heating facilities, and furniture and home appliance manufacturing.

Appearance shape: surface state: galvanized sheet due to different treatment methods in the coating process, the surface state is also different, such as general.

Through spangle, fine spangle, flat spangle, no spangle and phosphating surface, etc.
1. Material: DX51D+Z (80 zinc layer, 120 zinc layer, 275 zinc layer).
2. Uses: outdoor sign manufacturing, ventilation ducts, machinery and equipment manufacturing, construction, automobiles, agriculture, animal husbandry, fishery and commercial and other industries.
3. Performance: In line with the standard, with factory warranty, ordinary bending and stamping.

FAQ

Q1: What’s the range of the thickness of the steel sheet , can it be customized?
Answer: Normally, the thickness of the iron sheet is 0.3-2.0mm, and it also can be customized according to the customer’s request

Q2: Is the size of the iron sheet fixed?
Answer: The size can be cut precisely according to the size the customer needs, the precision can reach 0.01mm.

Q3: What is the tolerance of the Steel sheet?
Answer: The tolerance of the steel sheet is ±0.025mm

Q4: What was the packing like when you delivered the goods?Can you protect the product from scratch?
Answer: we will use mdf board to separate the delivery, to ensure that the product surface will not produce scratch.

Q5: How should the surface dirt be cleaned during use?
Answer:
A. If only the surface of the door has dirt to adhere to, then wipe with soapy water can.
B. If you want to remove the mark or tape mark on the door, you can wipe it with warm water and then with alcohol.
C. If there is dirt such as oil stains on the surface, it can be directly swabbed with a soft cloth and then washed with ammonia solution
D. there are rainbow lines on the door surface, which may be caused by too much oil or detergent. Rinse with warm water.
E. If there is rust on the surface, it can be cleaned with 10% nitric acid, or with a special maintenance solution F. Must Phosphating Before Infilling

Q6: How long is the delivery?
Answer:15-20 days according to the patterns and size you ordered.